Certificates of Analysis
Every batch we sell is tested by an independent laboratory. When a certificate is published here it appears unedited, carrying the HPLC purity trace, the quantity assay and the batch it belongs to.
Published results are free to read, quote and cite. Every entry names its laboratory report ID, so any figure here can be put to the laboratory directly. If you are comparing suppliers, we would rather you read the certificate than take our word for it.
- Certificates
- 14 published
- Testing
- SideChain Analytics
- Methods
- HPLC purity, quantity assay
5-Amino-1MQ 10mg
Tested by SideChain Analytics · reported September 27, 2026
- Batch purity
- 99.7%
- Mass / quantity
- 11.71 mg net peptide
- Report ID
- COA-2026-SC-02798
- Lot
- VPAM10100
Identity confirmed against reference standard by MRM 159.1 › 142.1. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Net peptide content is 11.71 mg against a 10 mg label claim, a fill accuracy of 117.1%. Results relate to the sample as received and carry no pass/fail determination.
KLOW 80mg
Tested by SideChain Analytics · reported September 27, 2026
- Batch purity (4-component average)
- 99.74%
- Mass / quantity
- 95.50 mg net peptide (four components)
- Report ID
- COA-2026-SC-02802
- Lot
- VPKL80100
- Measured components
- BPC-157 99.59% (10.72 mg), TB-500 99.62% (11.02 mg), GHK-Cu 99.81% (62.48 mg), KPV 99.64% (11.29 mg)
Blend composition report. Four components were measured: BPC-157 10.72 mg at 99.59%, TB-500 11.02 mg at 99.62%, GHK-Cu 62.48 mg at 99.81%, KPV 11.29 mg at 99.64%. The certificate reports no single purity for the blend, so the purity shown above is the average of those four figures weighted by net peptide content; GHK-Cu is the largest component at 65% of it and the highest of the four. Total net peptide content is 95.50 mg against an 80 mg label claim, a fill accuracy of 119.4%. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Results relate to the sample as received and carry no pass/fail determination.
GHK-Cu 100mg
Tested by SideChain Analytics · reported September 27, 2026
- Batch purity
- 99.8%
- Mass / quantity
- 116.17 mg net peptide
- Report ID
- COA-2026-SC-02800
- Lot
- VPGC100100
Identity confirmed against reference standard by MRM 341.2 › 110.4. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Net peptide content is 116.17 mg against a 100 mg label claim, a fill accuracy of 116.2%. Results relate to the sample as received and carry no pass/fail determination.
KPV 10mg
Tested by SideChain Analytics · reported September 27, 2026
- Batch purity
- 99.7%
- Mass / quantity
- 10.67 mg net peptide
- Report ID
- COA-2026-SC-02803
- Lot
- VPKP10100
Identity confirmed against reference standard by MRM 343.2 › 70.1. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Net peptide content is 10.67 mg against a 10 mg label claim, a fill accuracy of 106.7%. Results relate to the sample as received and carry no pass/fail determination.
MOTS-C 10mg
Tested by SideChain Analytics · reported September 27, 2026
- Batch purity
- 99.4%
- Mass / quantity
- 11.45 mg net peptide
- Report ID
- COA-2026-SC-02805
- Lot
- VPMC10100
Identity confirmed against reference standard by MRM 725.5 › 175.1. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Net peptide content is 11.45 mg against a 10 mg label claim, a fill accuracy of 114.5%. Results relate to the sample as received and carry no pass/fail determination.
SS-31 10mg
Tested by SideChain Analytics · reported September 27, 2026
- Batch purity
- 99.6%
- Mass / quantity
- 11.26 mg net peptide
- Report ID
- COA-2026-SC-02806
- Lot
- VPS310100
Identity confirmed against reference standard by MRM 320.7 › 120.1. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Net peptide content is 11.26 mg against a 10 mg label claim, a fill accuracy of 112.6%. Results relate to the sample as received and carry no pass/fail determination.
TB-500 10mg
Tested by SideChain Analytics · reported September 27, 2026
- Batch purity
- 99.5%
- Mass / quantity
- 11.19 mg net peptide
- Report ID
- COA-2026-SC-02807
- Lot
- VPTB10100
Identity confirmed against reference standard by MRM 445.3 › 241.2. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Net peptide content is 11.19 mg against a 10 mg label claim, a fill accuracy of 111.9%. Results relate to the sample as received and carry no pass/fail determination.
CJC-1295 No DAC + Ipamorelin 10mg (5+5)
Tested by SideChain Analytics · reported September 27, 2026
- Batch purity (2-component average)
- 99.64%
- Mass / quantity
- 11.20 mg net peptide (two components)
- Report ID
- COA-2026-SC-02799
- Lot
- VPCI10100
- Measured components
- Ipamorelin 99.62% (5.49 mg), CJC-1295 99.65% (5.71 mg)
Blend composition report. Two components were measured: Ipamorelin 5.49 mg at 99.62%, CJC-1295 5.71 mg at 99.65%. The certificate reports no single purity for the blend, so the purity shown above is the average of those two figures weighted by net peptide content; CJC-1295 is the larger component at 51% of it and the higher of the two. Total net peptide content is 11.20 mg against a 10 mg label claim, a fill accuracy of 112.0%. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Results relate to the sample as received and carry no pass/fail determination.
Ipamorelin 5mg
Tested by SideChain Analytics · reported September 27, 2026
- Batch purity
- 99.5%
- Mass / quantity
- 5.71 mg net peptide
- Report ID
- COA-2026-SC-02801
- Lot
- VPIP5100
Identity confirmed against reference standard by MRM 357.0 › 100.1. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Net peptide content is 5.71 mg against a 5 mg label claim, a fill accuracy of 114.2%. Results relate to the sample as received and carry no pass/fail determination.
Melanotan II 10mg
Tested by SideChain Analytics · reported September 27, 2026
- Batch purity
- 99.3%
- Mass / quantity
- 11.14 mg net peptide
- Report ID
- COA-2026-SC-02804
- Lot
- VPM210100
Identity confirmed against reference standard by MRM 513.1 › 134.1. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Net peptide content is 11.14 mg against a 10 mg label claim, a fill accuracy of 111.4%. Results relate to the sample as received and carry no pass/fail determination.
Tesamorelin 10mg
Tested by SideChain Analytics · reported September 27, 2026
- Batch purity
- 99.5%
- Mass / quantity
- 13.27 mg net peptide
- Report ID
- COA-2026-SC-02808
- Lot
- VPTS10100
Identity confirmed against reference standard by MRM 1028.7 › 136.1. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Net peptide content is 13.27 mg against a 10 mg label claim, a fill accuracy of 132.7%. Results relate to the sample as received and carry no pass/fail determination.
BPC-157 10mg
Tested by SideChain Analytics · reported September 16, 2026
- Batch purity
- 99.9%
- Mass / quantity
- 12.58 mg net peptide
- Report ID
- COA-2026-SC-02083
- Lot
- VPBP10100
Identity confirmed against reference standard by MRM 710.4 › 70.1. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Net peptide content is 12.58 mg against a 10 mg label claim, a fill accuracy of 125.8%. Results relate to the sample as received and carry no pass/fail determination.
Retatrutide 20mg
Tested by SideChain Analytics · reported September 16, 2026
- Batch purity
- 99.7%
- Mass / quantity
- 29.26 mg net peptide
- Report ID
- COA-2026-SC-02082
- Lot
- VPRT20100
Identity confirmed against reference standard by MRM 947.9 › 136.1. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Net peptide content is 29.26 mg against a 20 mg label claim, a fill accuracy of 146.3%. Results relate to the sample as received and carry no pass/fail determination.
Tirzepatide 30mg
Tested by SideChain Analytics · reported September 16, 2026
- Batch purity
- 99.8%
- Mass / quantity
- 38.05 mg net peptide
- Report ID
- COA-2026-SC-02084
- Lot
- VPTR30100
Identity confirmed against reference standard by MRM 963.9 › 136.1. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Net peptide content is 38.05 mg against a 30 mg label claim, a fill accuracy of 126.8%. Results relate to the sample as received and carry no pass/fail determination.
All materials are supplied for in-vitro laboratory research use only and are not for human or animal use. Certificates describe the tested batch and are not a claim of therapeutic effect.
Published certificates
Every figure here came off a certificate.
Volta's highest published purity results, ordered by the measured figure. >99% is the specification every batch is released to. The figure on a certificate is what a laboratory measured for one lot.
| Compound | Purity |
|---|---|
 BPC-157 10mgSideChain Analytics · September 16, 2026VPBP10100 | 99.9%by HPLC-MS/MS |
 GHK-Cu 100mgSideChain Analytics · September 27, 2026VPGC100100 | 99.8%by HPLC-MS/MS |
 Tirzepatide 30mgSideChain Analytics · September 16, 2026VPTR30100 | 99.8%by HPLC-MS/MS |
 KLOW 80mgSideChain Analytics · September 27, 2026VPKL80100 | 99.74%average of 4 componentsBPC-157 99.59%TB-500 99.62%GHK-Cu 99.81%KPV 99.64%by HPLC-MS/MS |
 5-Amino-1MQ 10mgSideChain Analytics · September 27, 2026VPAM10100 | 99.7%by HPLC-MS/MS |
 KPV 10mgSideChain Analytics · September 27, 2026VPKP10100 | 99.7%by HPLC-MS/MS |
Each result relates to the sample the laboratory received and carries no pass or fail determination of its own. The comparison with >99%is Volta's release check: a batch that misses the specification is rejected, not discounted. A blend certificate measures each compound in the vial separately and states no single purity for the vial: the average shown is across those measurements, weighted by net peptide content.
Verify any batchFinding your batch
You should not have to guess what is in your vial
A certificate is only worth reading if you can tell whether it describes the material you were sent. Every vial we ship carries a batch number and a QR code that resolve to one row in the archive above, which is the difference between a published result and a published result about your lot.
- 1Unique batch number
Printed on the side panel of the vial and on the product page. VPRT20100 is the compound, the fill and the batch, and it is the lot number on that batch's certificate.
- 2QR to that batch's COA
Beside “Scan for COA” on the same panel. Scanning it opens the third-party result for the lot in that vial, not a certificate for some other batch and not a marketing page.
Volta Peptides · Batch Verification
Verified. Traceable. Yours to check.
Every vial leaves here carrying its own batch number and a QR code that opens the independent laboratory result for that exact lot. Most suppliers publish one certificate for a compound and leave you to assume it covers the vial you were sent. We would rather you did not have to guess what is in yours.
Your batch results, one scan away.
01Turn the vial and scan the code
The QR is on the side panel of the label, beside the words Scan for COA, not on the front. It opens the Certificate of Analysis for the lot in that vial, reported by an independent laboratory, with the purity figure, the method and the date on it.
02No camera? Match the batch number
The batch number printed directly above the QR on that same panel is the lot number on the certificate. Look it up in the certificate archive and the two strings either match or they do not. Nothing has to be taken on trust.
Try it on this batch
This is the live code for Retatrutide 20mg, batch VPRT20100. Scan it or click it and you land on SideChain Analytics's own verification page for report COA-2026-SC-02082, which reported 99.7% by HPLC-MS/MS on September 16, 2026.
New labels are rolling out
QR-coded labels are being applied across the catalogue now. An order placed during the rollout may include vials carrying the previous label. Those vials still have a batch number, and the certificate for their lot is published in the archive or sent on request.