Products are for research use only, not for human use

MOTS-C 10mg sealed vial beside its specification card: catalogue number, CAS number, molecular formula and purity
In Stock

MOTS-C 10mg (Mitochondrial-Derived Peptide)

Batch #: VPMC10100 · tested as lot VPMC10100 on the certificate

MOTS-C is a 16-amino-acid peptide encoded in a short stretch of mitochondrial DNA, supplied as a lyophilized powder for laboratory research.

$32 USD

COA Verified

View Purity Report
99.4%

Volume discounts

Select vial strength

10mg
20mgOut of stock
  • Free shipping, on orders over US$149
  • >99% purity, HPLC specification
  • Seven-panel tested, independent lab
  • Same-day dispatch before 2:00 PM PT
Secure checkout
  • VisaVISA
  • Mastercard
  • American ExpressAMEX
  • DiscoverDISCOVER
  • Apple PayPay
  • Interac e-TransferInterac
  • CryptocurrencyBTC

The Volta Guarantee

  • Lost parcel guarantee

    If your order is lost in transit, we replace it or refund it in full, at no cost to you, and we deal with the carrier ourselves.

  • Replacement guarantee

    If anything arrives broken, incorrect or missing, report it within 7 days and we replace it free of charge.

  • Support, 24/7

    Our team answers 24/7, usually in under 90 minutes. Questions about lots, certificates and testing are welcome.

Certificate of analysis

Lab verified

99.4%

Batch Purity

Lot
VPMC10100
Reported
September 27, 2026
Net content
11.45 mg net peptide

Lot VPMC10100 is the batch number printed on this page and on the vial.

Tested in this certificate

  • Purity, HPLC-MS/MS
  • Identity, HPLC-MS/MS
  • Net peptide content, Quantified
View COA
Verify on lab's website (Verify on SideChain Analytics's website, opens in a new tab)
Seven-panel tested

The Volta Quality Standard

Every product is tested on a seven-panel analysis by an independent laboratory, 10 tests in all. Published reports are in our Certificates of Analysis archive, and a certificate for the batch you receive is available on request.

10

Tests

  1. PurityHPLC-UV
  2. IdentityLC-MS
  3. Net peptide contentQuantitative
  4. EndotoxinsUSP <85> LAL
  5. Microbial contaminationPCR
  6. Heavy metalsICP-MS
  7. Fentanyl screenTargeted screen

The Volta Standard

What to expect when you order from Volta

Shipping, returns, testing and support. No surprises after checkout.

Shop the catalog
  • Free shipping.

    Free on orders over US$149. Canadian orders arrive in 1–4 business days; US orders from our California warehouse in 2 business days.

  • Same-day dispatch.

    An order received before 2:00 PM Pacific on a business day is dispatched the same day.

  • Seven-panel testing.

    Every product is tested by an independent laboratory: purity (HPLC-UV), identity (LC-MS), net peptide content, endotoxins (USP <85> LAL), microbial contamination (PCR), heavy metals (ICP-MS) and a fentanyl screen.

  • Fast shipping.

    Canadian orders ship from British Columbia and US orders from California.

  • We always put our customers first.

    If there is an issue with your shipment or the products you receive, we fix it for you free of charge. We provide a level of professionalism and customer care that is unrivaled.

  • Support, 24/7.

    Usually answered in under 90 minutes, by people who know the catalogue, its lots and its certificates.

General Information

PropertyDetails
Product ContentsLyophilized powder, 10mg per vial
Available Sizes10mg, 20mg
Product TypePeptides
Purity99.4%
TestingSeven-panel analysis, independent laboratory
CAS Number1627580-64-6
Molecular FormulaC₁₀₁H₁₅₂N₂₈O₂₂S₂
Molecular Weight2,174.6 g/mol
AppearanceLyophilized powder
StorageStore lyophilized peptide at -20°C in a dry, dark environment.
SolubilitySoluble in sterile water
Shelf Life24 months from date of manufacture

Research Use Only

For in-vitro laboratory research by qualified professionals only. Not for human or animal administration. Not a drug, food, cosmetic or dietary supplement. Not intended to diagnose, treat, cure, mitigate or prevent any disease. Batch-specific Certificates of Analysis available on request for every product.

MOTS-C 10mg: overview

What the vial contains and what the material is, stated as specifications rather than as outcomes.

MOTS-C supplied as a lyophilized powder in a sealed single-use vial containing 10 mg of material. MOTS-C: molecular formula C₁₀₁H₁₅₂N₂₈O₂₂S₂, molecular weight 2,174.6 g/mol, CAS 1627580-64-6. Released to a specification of >99% purity by HPLC. Soluble in sterile water. Supplied for in-vitro laboratory research only. Not a drug, food or supplement. Not for human or veterinary use.

Volta does not provide dosing, administration or protocol guidance for any material listed.

MOTS-C 10mg specifications

Every field the product record holds. A field with no value is omitted rather than printed as a dash.

Fill
10mg
Form
Lyophilized powder
Appearance
White lyophilised powder
Full chemical name
Mitochondrial open reading frame of the 12S rRNA type-c
Other known names
Mitochondrial-Derived Peptide
Compound class
Mitochondrial peptide
Sequence, one-letter
MRWQEMGYIFYPRKLR
Sequence, three-letter
Met-Arg-Trp-Gln-Glu-Met-Gly-Tyr-Ile-Phe-Tyr-Pro-Arg-Lys-Leu-Arg
Residues
16
CAS number
1627580-64-6
Molecular formula
C₁₀₁H₁₅₂N₂₈O₂₂S₂
Molecular weight
2,174.6 g/mol
PubChem SID
255386757
Production
Synthetic, by solid-phase peptide synthesis
Solubility
Soluble in sterile water
Shelf life
24 months from date of manufacture

MOTS-C analytical verification and batch documentation

What the purity figure on this page is, who measured what, and which of the two a reader is looking at.

Specification. Every batch is released to >99% purity by HPLC. That is a threshold Volta sets, and it is a promise rather than a measurement.

Measurement. SideChain Analytics reported 99.4% by HPLC-MS/MS for lot VPMC10100 on September 27, 2026, and confirmed identity at an observed mass of 11.45 mg net peptide. That report covers this vial.

The certificate can be checked against the laboratory rather than against us: verify on SideChain Analytics.

Checking a certificate. The batch number printed beside the price is derived from the compound code and the vial strength; the lot number on a certificate is transcribed from the document. They are produced independently, so comparing them is a real check. How to read one is set out in the quality and testing methodology page.

For in-vitro laboratory research by qualified professionals only. Not for human or animal administration. Not a drug, food, cosmetic or dietary supplement. Not intended to diagnose, treat, cure, mitigate or prevent any disease.

MOTS-c is one of the mitochondrial-derived peptides, a class defined by being encoded in the mitochondrial genome rather than the nucleus; humanin is the other well-characterised member. In cell models it is studied for activation of AMPK, linked to inhibition of the folate-methionine cycle and accumulation of the purine intermediate AICAR, and it has been reported to translocate to the nucleus under cellular stress. Its two methionine residues make it susceptible to oxidation, which is a handling consideration covered in the stability section. This vial holds 10 mg of lyophilized powder and is released to a >99% purity specification by HPLC.

  • Released to a >99% purity specification by HPLC
  • Batch tested by SideChain Analytics, certificate published
  • Lyophilized powder, 10mg per vial
  • Soluble in sterile water
  • For laboratory research use only

Frequently Bought Together

MOTS-C 10mg
This item

MOTS-C 10mg

10mg

$32 USD

Bundle & Save

2
2 items

$116 USD

Save $5.80 USD

3
3 items

$155 USD

Save $15.50 USD

4
4 items

$199 USD

Save $29.85 USD

5
5 items

$273 USD

Save $54.60 USD

Your selection (5 items)
$273 USDSave $54.60 USD

Click any product above to toggle selection

Related research materials

GHK-Cu + KPV + BPC-157 + TB-500 80mg (50+10+10+10)
GHK-Cu + KPV + BPC-157 + TB-500 80mg (50+10+10+10)

Peptide Blends · 80mg

$84 USD
KPV 10mg
KPV 10mg

Peptides · 10mg

$39 USD
HCG 5,000iu
HCG 5,000iu

Peptides · 5,000iu

$44 USD
HCG 10,000iu
HCG 10,000iu

Peptides · 10,000iu

$69 USD
Epithalon 10mg
Epithalon 10mg

Bioregulators · 10mg

$34 USD
DSIP 10mg
DSIP 10mg

Peptides · 10mg

$46.71 USD
Tesamorelin 10mg
Tesamorelin 10mg

Peptides · 10mg

$74 USD
CJC-1295 No DAC + Ipamorelin 10mg (5+5)
CJC-1295 No DAC + Ipamorelin 10mg (5+5)

Peptide Blends · 10mg

$49 USD

MOTS-C 10mg: what is in the vial

The arithmetic specific to this 10mg vial, and what a milligram of MOTS-C costs in each strength the catalogue carries. Concentrations are stated, not recommended.

Vial contents

10 mg

Lyophilised powder, reconstituted by the buyer

Cost of material

$3.20 / mg USD

CA$4.60 / mg in Canadian dollars

Concentration at each diluent volume

10 mg of dry material reaches these concentrations in the volumes below. The figures are a unit conversion for preparing a laboratory stock solution, not a quantity to use.

Diluent addedConcentration
1 ml10 mg/ml
2 ml5 mg/ml
3 ml3.33 mg/ml
5 ml2 mg/ml

MOTS-C by the milligram

The same compound in every strength the catalogue carries, priced per milligram of material so the vials are comparable. Larger is not automatically cheaper.

VialPrice USDPer mg USDPer mg CAD
10mgthis page$32$3.20CA$4.60
20mgout of stock$52$2.60CA$3.75

The 20mg vial is the cheapest material in this range at $2.60 per mg.

Per-unit figures are quoted in US and Canadian dollars so the vials stay comparable against each other. The price you are charged is the one in the currency selected at the top of the page, and it is converted from the same US dollar base as the figures here.

MOTS-C purity and identity: how the figure is measured

What >99% (HPLC) means, the masses an identity check has to land on, and the entries that make a certificate of analysis checkable rather than decorative.

Stated purity

>99% (HPLC)

Area percent of the main peak by reversed-phase HPLC

Average mass

2,174.6 g/mol

The figure an identity check has to land on

Detection

280 nm

A 1 mg/ml solution reads about 3.90 AU in a 1 cm cell

Identity by mass: the ions to expect

An electrospray source protonates the molecule rather than weighing it neutral, so a spectrum shows a series of charge states rather than the molecular weight itself. These are the m/z values 2,174.6 g/mol produces, and they are what a mass spectrum on a certificate for MOTS-C has to match.

IonChargeExpected m/z
[M+H]+1+2,175.61
[M+2H]2+2+1,088.31

A peptide this size is normally reported at its doubly and triply charged states, and the singly charged ion may not appear at usable intensity at all. A spectrum showing only one of these is not a failed identity check.

Why 280 nm

The sequence carries 1 Trp and 2 Tyr, so it absorbs at 280 nm as well as at 214 nm on the peptide bond.

This matters when reading someone else's certificate: a purity figure quoted at 280 nm for a compound with no aromatic residue is measuring an absorbance the molecule does not have.

What a certificate for MOTS-C should carry

A purity percentage on its own is not checkable. These are the entries that make one verifiable, and their absence is the most common weakness in a research-peptide certificate.

  • The chromatogram, not only the number

    A stated area percent with no trace behind it cannot be read for the shape of the main peak or for what eluted beside it. The HPLC interpreter walks through what a trace shows.

  • Net peptide content, separately from gross mass

    A lyophilised peptide is a salt, usually of trifluoroacetic or acetic acid, plus residual water. The vial's stated milligrams are gross; net peptide content is the fraction of that mass which is the molecule. The two differ by ten to twenty percent routinely, and only one of them is what the price is per milligram of. The net peptide content calculator converts between them.

  • The counterion, named

    Which salt form the powder is in changes the net content and the pH the powder dissolves at. A certificate that never names it leaves both unknowable.

  • Water content, by a stated method

    Loss on drying and Karl Fischer water determination give different numbers, and a water figure with no method attached cannot be compared with anyone else's.

  • A laboratory and a report identifier

    Without both, nothing on the document can be traced back to the laboratory that issued it. The red flag checker lists the rest.

Published certificate for this batch

Laboratory
SideChain Analytics
Report ID
COA-2026-SC-02805
Reported
September 27, 2026
Purity
99.4%
Method
HPLC-MS/MS
Lot
VPMC10100

Read the reported figures against the expected masses above. Full pages are in the certificate library.

MOTS-C storage and stability

Handling as the product record states it, followed by the degradation chemistry this particular sequence is and is not exposed to.

Handling

Store lyophilized peptide at -20°C in a dry, dark environment. Once reconstituted, store at 2-8°C and use within 30 days. Avoid repeated freeze-thaw cycles. Lyophilized powder is stable at room temperature for shipping and short-term storage.

What degrades this compound

Each of these follows from the molecule itself rather than from general peptide handling.

  • Oxidation

    2 Met and 1 Trp

    These side chains oxidise on contact with dissolved oxygen and with peroxide traces in diluents. Oxidation adds 16 daltons per event, so it shows up on a mass spectrum as a satellite peak above the parent and on a chromatogram as a shoulder ahead of the main peak. Minimise headspace air, and do not use a diluent that has been standing open.

  • Deamidation

    1 Gln

    Asparagine and glutamine lose their side-chain amide in aqueous solution, becoming aspartate and glutamate. The product is one dalton heavier and one charge more acidic, which moves its retention time without changing its size much, so it reads as an extra peak rather than a smaller one. No asparagine here is followed by glycine, serine or histidine, the three neighbours that accelerate the reaction, so the rate is the slower baseline one.

  • Light sensitivity

    1 Trp and 2 Tyr

    The aromatic side chains that make this compound visible at 280 nm are the same ones that absorb ultraviolet light and photo-oxidise. This is the residue-level reason behind the instruction to store in the dark, and it is why an amber vial is not decoration.

What holds up

The degradation routes this compound is not exposed to, which is as specific a fact as the ones it is.

  • Net hydrophilic

    GRAVY -0.94

    A negative grand average of hydropathy means the side chains are on balance polar, which is the profile that stays in solution rather than associating. Freeze-thaw cycles are still worth avoiding, but this compound is not one of the hydrophobic sequences that aggregate irreversibly at an ice front.

  • Solubility window

    calculated pI 10.6, net charge 3 at pH 7

    A peptide is least soluble within about a pH unit of its isoelectric point, where it carries no net charge. This one is far enough from neutral that it holds a real charge in an ordinary diluent, which is what keeps it dissolved.

Derived from the primary sequence MRWQEMGYIFYPRKLR, calculated isoelectric point 10.59, GRAVY -0.937. Check the arithmetic with the peptide property calculator and the freeze-thaw estimator.

MOTS-C in Canada

Price in Canadian dollars, where the parcel ships from, and how long it takes.

Price in CAD

CA$46

The figure charged, not a converted estimate

Ships from

British Columbia

A domestic parcel, so no import clearance step

Transit

1 to 4 business days

After up to 1 business day of handling

Free standard shipping

Over CA$199

A bar set for this market, not converted from the US one

Whenever our British Columbia warehouse holds it, MOTS-C 10mg ships from there to Canadian addresses, so the parcel never crosses a border; if it is only in our US warehouse in California, it crosses one. Shipping from British Columbia removes the failure a Canadian buyer of research peptides is usually weighing: an inbound international shipment can be held for import clearance or seized, and a domestic one has no clearance step to be held at.

Shipping is quoted live against the delivery address at checkout rather than estimated here, and both the standard and express tiers show their price and transit window before a payment method is chosen. The figure the page shows is the figure the rail charges: all three settlement rails price shipping through the same functions the quote does.

The Canadian figure above is not a loose conversion. Each product's US dollar base is chosen so that the live conversion lands on the Canadian shelf price set for this market, and the result is pushed up to a whole dollar rather than left carrying cents, so one figure serves the page, the feed and every payment rail. See the shipping policy for carriers and cut-off times, and the legal position on research peptides in Canada for the regulatory picture.

MOTS-C certificate of analysis: the reported figures

Every field transcribed from the laboratory's report, so it can be read against the certificate images rather than instead of them. The report itself is published as page images; the laboratory's own verification page is linked where it publishes one.

Batch Purity

99.4%

Covers the 10 mg fill on this page.

Laboratory
SideChain Analytics
Laboratory report
COA-2026-SC-02805
Lot number
VPMC10100
Reported
September 27, 2026
Method
HPLC-MS/MS
Purity basis
Ph. Eur. 2.2.46
Identity confirmed by
m/z 725.5 to 175.1
Measured content
11.45 mg net peptide
Determination
No pass or fail determination. Results relate to the sample as received.

Laboratory notes, as transcribed

Identity confirmed against reference standard by MRM 725.5 › 175.1. Chromatographic purity is the principal-component peak area (Ph. Eur. 2.2.46) and bounds peptide-related impurities only. Net peptide content is 11.45 mg against a 10 mg label claim, a fill accuracy of 114.5%. Results relate to the sample as received and carry no pass/fail determination.

MOTS-C 10mg volume pricing

Unit price at each quantity band, computed from the same tiers the cart applies. Nothing here is a promotional figure: these are the prices checkout charges.

QuantityDiscountEach, USDYou save eachGoods total, USDGoods total, CAD
1-4 unitsNone$32.00None$32.00CA$46
5-9 units10%$28.80$3.20$144.00CA$207
10+ units20%$25.60$6.40$256.00CA$367

The discount is applied to the quantity of this one product, not to the number of different items in the cart. It is the better of the volume tier or any add-on offer, never both.

CAD is the goods total for an order of this product alone, before shipping and tax. A cart holding other products converts its goods total once, so the figure there will differ by a dollar or so.

MOTS-C 10mg: frequently asked questions

Answered from the product record and the certificate file. Volta does not answer questions about administration, dosing or protocols.

What is supplied in a 10 mg vial of MOTS-C?

A sealed single-use vial containing 10 mg of MOTS-C as a lyophilized powder. Soluble in sterile water. No diluent, syringe or other supply is included.

Is MOTS-C supplied for human use?

No. For in-vitro laboratory research by qualified professionals only. Not for human or animal administration. Not a drug, food, cosmetic or dietary supplement. Not intended to diagnose, treat, cure, mitigate or prevent any disease. Volta does not provide dosing, administration or protocol guidance for any material listed.

What purity is this MOTS-C released to?

>99% by HPLC is the specification every batch is released to. That is a threshold Volta sets, not a measurement. SideChain Analytics separately reported 99.4% by HPLC-MS/MS for lot VPMC10100 on September 27, 2026, which covers this vial.

Is there a certificate of analysis for this MOTS-C vial?

Yes. The certificate is shown on this page as page images and states the laboratory, the lot number, the method and the date. The laboratory publishes its own verification page for the report, so it can be checked against SideChain Analytics rather than against us.

How is MOTS-C identified?

CAS 1627580-64-6, molecular formula C₁₀₁H₁₅₂N₂₈O₂₂S₂, molecular weight 2,174.6 g/mol. Those identifiers are what an incoming-goods check compares a certificate against, and they are stated here so the comparison can be made before ordering.

What is the amino acid sequence of MOTS-C?

16 residues: MRWQEMGYIFYPRKLR in one-letter notation, and Met-Arg-Trp-Gln-Glu-Met-Gly-Tyr-Ile-Phe-Tyr-Pro-Arg-Lys-Leu-Arg written out. The sequence is what a mass spectrometry result on a certificate is checked against.

How should MOTS-C be stored before reconstitution?

Store lyophilized peptide at -20°C in a dry, dark environment. Once reconstituted, store at 2-8°C and use within 30 days. Avoid repeated freeze-thaw cycles. Lyophilized powder is stable at room temperature for shipping and short-term storage.

Does Volta list other vial sizes of MOTS-C?

Yes: 20 mg. Each size is a separate listing with its own price, batch number and certificate status.

Where does this ship from?

British Columbia, Canada. Canadian orders are domestic, so they clear no customs and pay no import duty. International orders ship from the same facility.

Research use only

This product is not a drug, food, or cosmetic, and is not for human consumption.

Products are sold only to qualified researchers and licensed laboratories.

These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

MOTS-c research

Everything Volta publishes on this compound, across every vial size, is collected on what the mitochondrial-derived peptide literature shows.

Vial sizes of this compound

MOTS-c is one of the compounds in Volta's peptides group, which collects the rest of the range of the same composition alongside the comparisons and guides that cover it.

More from the research catalogue

Every compound below has its own specification, batch number and certificate page, whether or not a vial is in stock today. Supplied for laboratory research use only.

Other vial sizes

Related research compounds

Browse all peptides

Your Cart

Your cart is empty

Browse our catalog to add research compounds.